Allied Mako G-095B PoE Industrial GigE camera/Kowa C-Mount 6mm f/1.8 HC lens

Description

Mako G-095B PoE
GigE camera with Sony ICX692 sensor
The Mako G-095B/C is an industrial GigE camera with Sony's ICX692 sensor. Mako cameras have the same 29 x 29 mm form factor and the same mounting positions as many analog cameras. All models include PoE, three optocoupled outputs, and a 64 MB image buffer. The image quality profits from the precisely aligned sensors.
● Sony ICX692 (type 1/3), 0.9 Megapixels
● Trigger
External trigger event: rising/falling/any edge, level high/low
External trigger delay: 0 to 42 s in 1 µs increments
● Sync modes
Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
● Modular options
Various IR cut/pass filters, protection glass
CS-Mount
White medical housing
Mako: G-095
Interface:
IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)
Resolution:
1292 x 734
Sensor:
Sony ICX692
Sensor type:
CCD Progressive
Sensor size:
Type 1/3
Cell size:
4.08 µm
Lens mount:
C/CS-Mount
Max frame rate at full resolution:
42.8 fps
A/D:
14 bit
On-board FIFO:
64 MB
Output
Bit depth:
8/12 bit
Mono modes:
Mono8, Mono12, Mono12Packed
Color modes YUV:
YUV411Packed, YUV422Packed, YUV444Packed
Color modes RGB:
RGB8Packed, BGR8Packed
R
aw modes:
BayerRG8, BayerRG12, BayerRG12Packed
General purpose inputs/outputs (GPIOs)
Opto-coupled I/Os:
1 input, 3 outputs
Operating conditions/Dimensions
Operating temperature:
+5°C to +45°C (housing temperature)
Power requirements (DC):
PoE /12 V - 24 V
Power consumption (12 V):
2.5 W (PoE) / 2.2 W (non-PoE)
Mass:
80 g
Body Dimensions (L x W x H in mm):
60.5 x 29 x 29 mm, incl. connectors
Regulations:
CE, FCC Class B, RoHS
Smart features
● ROI (Region of Interest Readout)
● Camera temperature monitoring
● Exposure
Auto/one push/programmable
Exposure time 41 µs to 84 s
● White balance
Auto/one push/programmable
● On-board debayering
● Hue, saturation
● Gain
Auto/one push/programmable
Manual gain control: 0 to 32 dB (1 dB/step)
● Look-up table (LUT), gamma correction
● DSP subregion (selectable ROI for auto features)
● Binning (up to 8 x 14, independent x and y binning)
● Stream hold
● StreamBytesPerSecond (easy bandwidth control)
● Event channel
● Chunk data
● 3 storable user sets
Applications
The Mako is an inexpensive industrial GigE camera with a compact form factor. It is suitable for all typical machine vision applications:
● Robotics
● Quality control
● Inspection, surveillance
● Industrial imaging
● Machine vision
● Logistics
Kowa C-Mount 6mm f/1.8-16 1" HC Series Fixed Lens
Key Features
Suitable for Wide Range of Applications
Machine Vision/Factory Automation Lens
Designed for 1" Sensor Cameras
Low Distortion & Accurate Reproduction
Corner Brightness: No Fading at Edges
Excellent Light Transmission
The
C-Mount 6mm f/1.8-16 1" HC Series Fixed Lens
from
Kowa
is designed for use with 1" sensor cameras in CCTV, machine vision, and factory automation applications. The focal length of this lens is 6mm, and the aperture range starts at f/1.8 and will stop down to f/16. The lens offers low distortion and a fast aperture in a small chassis, thereby making it
suitable for smaller format cameras.
Helps 1" sensor cameras capture crisp and clear images at high resolutions
Lightweight and compact design makes it suitable for a wide variety of applications, such as machine vision and factory automation
Ensures corner brightness with no fading along the edges of the image
Low distortion helps achieve accurate image reproduction