LENZ HO SCALE LE130 0.7 AMP LOCOMOTIVE DECODER

Description

LENZ HO SCALE LE130
0.7 AMP LOCOMOTIVE DECODER
********************************************************************************************
The DIGITAL plus locomotive decoder LE130 is suitable for all DC motors in
HO scale locomotives with continuous current draw of 1.0 Amp.
or less. The
characteristics of the decoder are:
∗
Control of the motor’s rotational speed (load compensation). Regardless of
the load, the motor’s rotation speed is kept nearly constant. During extremely
slow movement (for instance through sharp curves and over a series of
turnouts), LE130 always provides the motor with enough voltage. This creates
the impression that there is actually 100 tons moving.
∗
Selectable for operation with 14/27, or 28/55 speed steps.
∗
Operation on conventional DC layouts is possible. This feature may be
disabled.
∗
Provides 1A continuous motor current.
∗
Four on/off function outputs with a current rating of 200
mA each. Two of the
function outputs are dedicated for the directional headlights.
∗
Support for Advanced Consist Control and Extended Addressing
∗
Support for short form programming on the main for acceleration and
deceleration trim
∗
Support for all form of programming as described in NMRA RP-9.2.3
∗
Programmable locomotive address, acceleration and brake momentum
,
speed curve and much more.
∗
Size: L 1.04" x W 0.67"x H 0.26"
L 26.5 x W 17 x H 6.5 mm