-40%
Soundtraxx {885012} Ver 1.2 TSU-21PNEM Tsunami2 BALDWIN & OTHER YANKEEDABBLER
$ 52.25
- Description
- Size Guide
Description
YOU ARE LOOKING AT A Soundtraxx {885012} Tsunami 2 TSU-21PNEM for BALDWIN & OTHER Diesel Engines.The Tsunami 2 BALDWIN & OTHER Diesel is preloaded with the following prime mover sounds BALDWIN VO; BALDWIN 608NA; BALDWIN 608A; BALDWIN 606NA; Rio Grande Southern Galloping Goose; Dual Whitcomb; Fairbanks-Morse; GE GTEL UP "Slab Side"; GE GTEL UP "Veranda"; GE GTEL UP "Big Blow" A unit; GE GTEL UP "Big Blow" B unit & Cummins QSK19C x3 GenSet.
TSU-21PNEM Digital Sound Decoders
The TSU-21PNEM is a 1-amp Digital Sound Decoder with six function outputs designed for easy plug-in operation when mated to a 21-pin NEM connector.
Specifications
Dimensions:
30.5 x 15.5 x 6.5mm
Max. Motor Stall Current:
1A
Max. Function Current:
100mA (each output)
Function Outputs:
6
Audio Amplifier:
2 Watts, 8-Ohm Load
DCC Track Voltage:
7.5V – 22V
Speakers
The Tsunami2 line is equipped with powerful new amplifiers; therefore, it is important to
choose a capable speaker
to use with these decoders.
Tsunami2 Software Version 1.2 Update
Bring more realism to your layout than ever before with our amazing new diesel features!
New Software Version 1.2 Diesel Features:
Prime Mover Pitch Shift
Auxiliary HEP Generator
Straight-to-Idle
True-Idle
New
GenSet Specific Features:
Cummins QSK19C x 3
Prime Mover Sounds
Individual polyphonic sound channels for
all 3 prime movers
Unique volume & alternate mixer controls
for each prime mover
Correct Blower Motor Fan Sounds
Dynamic Braking supported for “GenSet II” type locomotives
Prime Electronic Bell
Leslie S3LR & RS3K Airhorns
Electronic Air Dryer
New
GTEL Specific Features:
GE GTEL UP "Slab-side"
sounds
GE GTEL UP "Veranda"
sounds
GE GTEL UP "Big Blow"
sounds (A & B units)
Cooper-Bessemer hostler motor for the
"Big-Blow" A unit
Industry exclusive "backfire" sound effect
Manually start/stop the Turbine engine with
a function key
Turbine Timeout Feature
Speed Limiting Features
Diesel Features
Tsunami2 diesel sound decoders are full of new features including over 50 sound effects including engine startup and shutdown, engine prime mover through all eight notches, Straight-to-8, HEP mode, 13 bells, over 40 airhorns, 4 air compressors, dynamic brakes, radiator fans, brake squeal, and more!
Each diesel version (EMD, GE, etc.) contains up to 9 manufacturer specific prime movers (Turbo, Non-turbo, etc.)
First ever Diesel Dynamic Digital Exhaust (DDE) for a more authentic operating experience
Startup, shutdown and exhaust through 8 notches
Automatic or manual notching
Functioning dynamic brake with variable load sound and adjustable braking rate
Over 40 air horns
Selectable compressors, bells, and couplers
First ever Fireman Ed is ready to work on the locomotive, with general service, cab sounds and more!
Clickety-clack, fueling, and authentic cab chatter add realism
Prototypically correct HEP modes and steam heat for authentic passenger train operations
It is compatible with the NMRA DCC Standards and Recommended Practices.
IT IS NEW IN BOX AND RETAILS FOR 9.95. THANKS FOR LOOKING AND GOOD LUCK.
Powered by SixBit's eCommerce Solution