TCS 1423 ~ T1-KAC ~ HO Scale ~ DCC Motor Decoder 9 Pin With Keep Alive Plug

Description

Iron Planet Hobbies
TCS T1-KAC DCC Decoder 9 Pin With Keep Alive Plug 1423
The T1 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug.
The T1-KAC is equipped with a 2-pin mini connector (Blue and Black w/ White Stripe wires) for use with a TCS Keep Alive™ with connector (“KA-C”). In order to use Keep Alive™ with this decoder, simply connect the plug from the Keep Alive™ to the plug on the decoder.
Note: The Green and Purple wires on this decoder are not used. The T1 is a 2-function decoder, but still uses the 9-pin JST which includes the Green and Purple wires.
Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
Airwire™ Compatible:
Fully compatible with Airwire™ operation.
User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 0.969″ x 0.661″ x 0.193″ or 24.61mm x 16.79mm x 4.9mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2
We are an authorized TCS dealer
.
Thanks For Looking!