TCS KAM4P-LH ~ DCC Decoder ~ Keep Alive ~ 8 Pin Plug ~ 5″ Harness ~ 1488

Description

Iron Planet Hobbies
TCS KAM4P-LH ~ DCC Decoder ~ Keep Alive ~ 8 Pin Plug ~ 5″ Harness ~ 1488
This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but features the same operational characteristics. The KAM4P-LH includes a long-length (5 inch) harness with 8-pin NMRA plug at the end.
Keep-Alive®:
Included on-board for smooth, stutter-free operation.
Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.
DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.
Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
Airwire™ Compatible:
Fully compatible with Airwire™ operation.
User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Specs:
Interface Type:
Direct-Plug (8-Pin NMRA)
Dimensions (L x W x H): 0.945” x 0.66” x 0.33” or 24 mm x 16.7 mm x 8.38 mm
Scale: HO Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 200 mA
12V Outputs:
4
We are an authorized TCS dealer
.
Thanks For Looking!